HP295中间裂纹产生机理分析及控制措施

通过对HP295封头冲压开裂件缺陷光电镜分析,查找到缺陷产生部位及其导致原因。对多组铸坯低倍样检查,发现中间裂纹是缺陷根源。此后,根据现场生产情况,分析钢中磷、硫含量、钢水过热度、铸机设备精度、拉速和二次冷却强度等因素对铸坯中间裂纹的影响。通过降低磷、硫,控制过热度,调整设备精度,降低拉速以及优化二次冷却等措施,HP295铸坯中间裂纹得到有效控制,用户加工开裂现象完全杜绝。     

Processing Modflow在地下水位预测中的应用

数值模拟软件逐渐成为预测地下水演化更普遍的工具,并且广泛应用于地下水动态变化研究.以乌苏市平原区为例,结合区域水文地质条件及钻井资料,利用Processing Modflow建立三维水流数值模拟模型,并对该模型进行平面流场拟合,验证出模拟值基本符合2018年实测地下水位,通过模型模拟2018—2027年不同条件地下水位变化趋势,结果显示,2027年现状条件下比用水总量条件下浅埋深面积减少了550km2.     

Maximum Data Generation Rate Routing Protocol Based on Data Flow Controlling Technology for Rechargeable Wireless Sensor Networks

For rechargeable wireless sensor networks, limited energy storage capacity, dynamic energy supply, low and dynamic duty cycles cause that it is unpractical to maintain a fixed routing path for packets delivery permanently from a source to destination in a distributed scenario. Therefore, before data delivery, a sensor has to update its waking schedule continuously and share them to its neighbors, which lead to high energy expenditure for reestablishing path links frequently and low efficiency of energy utilization for collecting packets. In this work, we propose the maximum data generation rate routing protocol based on data flow controlling technology. For a sensor, it does not share its waking schedule to its neighbors and cache any waking schedules of other sensors. Hence, the energy consumption for time synchronization, location information and waking schedule shared will be reduced significantly. The saving energy can be used for improving data collection rate. Simulation shows our scheme is efficient to improve packets generation rate in rechargeable wireless sensor networks.     

Enhanced linear magneto-resistance near the Dirac point in topological insulator Bi2(Te1−xSex)3 nanowires

Nano Research - We report the composition and back-gate voltage tuned transport properties of ternary compound Bi2(Te1−xSex)3 nanowires synthesized by chemical vapor deposition (CVD). It is...     

Thermodynamic analysis of ethanol synthesis from hydration of ethylene coupled with a sequential reaction

Coal-based ethanol production by hydration of ethylene is limited by the low equilibrium ethylene conversion at elevated temperature. To improve ethylene conversion, coupling hydration of ethylene with a potential ethanol consumption reaction was analyzed thermodynamically. Five reactions have been attempted and compared: (1) dehydration of ethanol to ethyl ether ({\mathrm{2C}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}\mathrm{OH}\iff{\mathrm{C}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{OC}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{+H}}_{\mathrm{2}}\mathrm{O}), (2) dehydrogenation of ethanol to acetaldehyde ({\mathrm{C}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}\mathrm{OH}\iff {\mathrm{CH}}_{\mathrm{3}}{\mathrm{CHO+H}}_{\mathrm{2}}), (3) esterification of acetic acid with ethanol ({\mathrm{C}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{OH+CH}}_{\mathrm{3}}\mathrm{COOH}\iff {\mathrm{CH}}_{\mathrm{3}}{\mathrm{COOC}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{+H}}_{\mathrm{2}}\mathrm{O}), (4) dehydrogenation of ethanol to ethyl acetate ({\mathrm{2C}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}\mathrm{OH}\iff {\mathrm{CH}}_{\mathrm{3}}{\mathrm{COOC}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{+2H}}_{\mathrm{2}}), and (5) oxidative dehydrogenation of ethanol to ethyl acetate ({\mathrm{2C}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{OH+O}}_{\mathrm{2}}\iff {\mathrm{CH}}_{\mathrm{3}}{\mathrm{COOC}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{+2H}}_{\mathrm{2}}\mathrm{O}). The equilibrium constants and equilibrium distributions of the coupled reactions were calculated and the effects of feed composition, temperature and pressure upon the ethylene equilibrium conversion were examined. The results show that dehydrogenation of ethanol to acetaldehyde has little effect on ethylene conversion, whereas for dehydrogenation of ethanol to acetaldehyde and ethyl acetate, ethylene conversion can be improved from 8% to 12.8% and 18.5%, respectively, under conditions of H₂O/C₂H₄ = 2, 10 atm and 300°C. The esterification of acetic acid with ethanol can greatly enhance the ethylene conversion to 22.5%; in particular, ethylene can be actually completely converted to ethyl acetate by coupling oxidative dehydrogenation of ethanol.     

The biological mechanisms of butanol tolerance and the application of solvent-tolerant bacteria for environmental protection

Toxicity caused by the accumulation of butanol in fermentation media is an important factor limiting the concentration of butanol. There is currently no systematic research in place investigating the butanol tolerance mechanism of bacteria such as Clostridium acetobutylicum, which adapts to butanol stress and regulates its growth and metabolism. Here, research results related to the butanol tolerance of C. acetobutylicum are reviewed to understand the molecular basis of changes in butanol-tolerant strains. Organic solvent-tolerant bacteria play an important role in the fields of biofuel production, enzyme preparation and bioremediation. An analysis of limitations of the application of organic solvent-tolerant bacteria has revealed that future research should focus on combining the microbial tolerance phenotype with specific utilization to achieve an optimal balance between organic solvent tolerance and production. This review serves as a reference for the improvement and engineering of strains that tolerate organic solvents. © 2019 Society of Chemical Industry     

Deep Integration of Innovation and Entrepreneurship (InE) Education in Chinese University Classrooms

Recently, InE has been regarded as a popular education strategy in Chinese universities. However, problems have been exposed in the adoption of InE, for example, in InE courses and competitions. The purpose of this paper is to provide a possible solution to the problems, which is to organize effective InE courses by integrating InE with Inter-Course-level Problem-Based Learning (ICPBL). A detailed case is demonstrated by an ICPBL elective course design with deep integration of InE in the teaching, learning, and assessments. This paper contributes to a new curriculum design for promoting InE education in practically for Chinese universities.